AUSTRALIA WIDE SHIPPING!

Cel-Fi GO stationary for Telstra 3g & 4g

Cel-Fi GO protects the mobile network in several ways by:

  • continuously monitoring power levels of the cell tower it is connected to and constantly adjusting the Cel-Fi's output power to suit.
  • only amplifying and disbursing a particular carrier’s mobile signal, operating within a set frequency band.
  • not interfering with the carrier’s network or other users on the network.
  • having a unique installation process to eliminate feedback into the mobile network.

    Cel-Fi GO is covered by a 24 month warranty.

Important Note: Cel-Fi GO will boost a single band at a time (either 3G 850 or 4G 700 or 4G 1800). It is highly recommended to leave the GO in 3G mode to ensure voice calls are received. Voice on 4G (VoLTE) will only work in selected areas and with later model phones.

  • Suitable for caravans and marine applications
  • 100dB of system gain
  • Up to 900m² indoor coverage area
  • Includes external and internal antennas
  • Locked to Telstra's Mobile Network
  • Carrier approved
  • Band Selection Button
  • Bluetooth WAVE App for iPhone, Android & Computers

 

If you are not 100% happy with the performance of this product
it can be returned within 30 days after purchasing for a full
refund minus any shipping charges.  Please contact us first for technical support.

Blackhawk Omni Directional Marine Antenna (included)

The Blackhawk Omni Marine High Gain Antenna is designed for versatility, for use in a variety of environments, in low to high signal areas and mounted in a marine environment.  The Blackhawk Omni Marine Antenna will operate with all mobile carriers regardless of the frequency they operate on.  With a 7 - 10 dBi gain and supporting all bands, this antenna is hard to beat and will provide the perfect solution for voice and data applications where high gain marine antennas are required.

Perfect for fixed wireless terminals, mobile broadband internet applications and smart repeater applications.  Comes with a marine mount base.  10m of cable is included.

Blackhawk Indoor Wall Mount Antenna (included)

Provides a 7dbi gain for 698-960 MHz.
Provides a 8dbi gain for 1710-2600 MHz.
The Blackhawk Indoor Wall Mount Antenna is designed to operate with all mobile carriers in mind, regardless of what frequency they operate on. Offering a 7dB gain this antenna is suitable as an indoor antenna or panel antenna, that can be mounted on a wall for repeater applications.  6m of cable is included.

Mobile Network Protection

Many mobile service providers have not supported the use of personal repeaters on their network. This is due to the interference they can cause when connected to the network, or when they are setup incorrectly. The Cel-Fi system is the only personal repeater that has been widely approved by carriers in Australia.

The Cel-Fi system is very different to a standard repeater, as it was designed to provide maximum coverage, be network friendly and can be easily installed by the end user.

It does this in several ways by

  • continuously monitoring power levels of the cell tower it is connected to and constantly adjusting the Cel-Fi's output power to suit.
  • only amplifying and disbursing a particular carrier’s mobile signal, operating within a set frequency band.
  • giving the service provider the ability to shut down the repeater remotely if needed, using a signal from the base station.
  • not interfering with the carrier’s network or other users on the network.
  • having a unique installation process to eliminate feedback into the mobile network.

Installing the system is easy:

Mount the external antenna on the roof of your van and run the cable inside the caravan and connect to the Cel Fi repeater.  Install the internal antenna in a suitable location inside the van and connect the cable to the other end of the Cel Fi repeater.  Power the Cel Fi repeater using  the supplied 12V power pack....done ! 

You can now enjoy superior voice and data coverage like never before - we guarantee it!