|
Optus Aurora Tuning Frequencies.
This page was last updated on 17th May
2006. Optus Aurora's last frequency change occurred on the 10th August
2005. This page will keep you up to date with any recent and future
updates to the Aurora tuning frequencies.
Your dish must be aligned to the Optus C1
satellite prior to scanning on your receiver/decoder.
You have two options:
1. Enter the manual scan screen of your decoder
and enter the following:
Frequency: 12407 MHz
Polarity: Vertical
Symbol rate: 30000 MB/s
Code rate or FEC 2/3
Network search: ON
The above procedure will scan the 12407
frequency and associated frequencies (Network Identity table) as set by Optus
Aurora.
All channels will now be loaded into your
decoder.
You can exit all menus.
OR
2. Enter the manual scan screen of your decoder
and enter the following:
Frequency 12407 MHz
Polarity: Vertical
Symbol rate: 30000 MB/s
Code rate or FEC 2/3
Network search: OFF
Press OK or ENTER to scan 12407
Now scan the following:
Frequency 12527 MHz
Polarity: Vertical
Symbol rate: 30000 MB/s
Code rate or FEC 3/4
Network search: OFF
Now scan the following:
Frequency 12728 MHz
Polarity: Vertical
Symbol rate: 24450 MB/s
Code rate or FEC 1/2
Network search: OFF
All channels will now be loaded into your
decoder.
You can exit all menus.
|