Loading... Please wait...The Satlook Micro G2 is a Swedish made, precision instrument that will measure and report all of the critical technical parameters necessary in this digital age. Installers who travel far and wide need to have confidence in their equipment and the Satlook will not let them down. There is still truth in the saying you get what you pay for and the Satllok Micro G2 proves this with its long list of features and high quality build.
| Features | • Measure on two LNB´s at the same time (920-2150MHz) • Spectrum-analyzer with zoom function • EasyFind satellite identification for faster installations • Super bright 3” LCD display • Very sensitive, easy to maximize weak and strong signals • Digital BER, QPSK and S/N-ratio • Readout NIT -gives Satellite ID and TV/Radio-channel info • DiSEqC according to level 1.0, 1.1 and 1.2 • LNB voltage 13/18V, 22KHz tone switch • Stores up to 99 memory positions • RS232 for PC-connection (up/download) • Built in, rechargeable battery • Nice & small, only 1,5Kg complete with carrying case • Made in Sweden |
| Technical specification | Input frequency: 920-2150MHz. Sat-TV min level in: About 35 dBuV (noise). Sat-TV max level in: About 100 dBuV. Input/output impedance: 75 Ohm, F-connectors. Measuring method (analog): Spectrum analyzer Signal presentation on LCD -display in form of thermometer scales. Pitch-tone, highest tone on loudspeaker. Measuring method (Digital): BER (bit error rate) S/N (signal/noise-ratio) Constellation (QPSK) Max-level: Thermometer scales showing max. Maxhold function. BER, S/N and QPSK showing max. Satellite-identification: Yes, by reading out the NIT in the bitstream. Info about the TV and Radio channels. Memory: Up to 99 transponders can be stored with name. Memory locks on: FEC, Symbol-rate Frecuency, 13/18v, 22kHz. Memory search: The instrument scans the memory positions and presents the matching transponders. Presentation: On LCD 3” PC-connection: Yes, RS232-output Power out: Yes, 13-18V. 22 kHz tone: Yes, on/off. DiSEqC: Yes, all 1.0 and 1.1. Also Toneburst on/off. DiSEqC actuator: Built in positioner for DiSEqC 1.2, SatScan and SatSelect. Battery: Rechargable 12v, 3.5amp/hour. Operational: About 1 hour on a fully charged Battery. Weight: 1.5kg incl.battery & carrying case. Accessories: Nylon carrying-case. Power-supply of 230V13.5V,1.7A Car-charger. BNC/F-adapter. |