Emitor's DIGIAIR Pro is developed in Sweden for exact alignment and adjustment of terrestrial antennas. This is made for both analog (dBuV) and digital (BER and SNR).

Features:

• Perfect for digital terrestrial installations (COFDM)
• Frequency range of 45-860MHz
• Easy digital readout of BER, SNR and MER
• Very sensitive, easy to maximize weak and strong signals
• Analoge signal level reads out in dBuV
• Presents one channel readout with high resolution or six channels simultaneously or the complete spectrum
• Built in beeper (pitch tone) and maxhold function
• Aerial power output, 0V, 5V, 12V and 24V
• Built in, rechargeable battery
• Power supply and car-charger enclosed
• Carrying-case enclosed
• Small and handy design
• Made in Sweden

DIGIAIR Pro is microprocessor controlled, making it very reliable and accurate.

Signal strength is presented on the LCD-display. In analog mode it shows a single channel or six channels at thesame
time. You can also choose to view the signal in spectrum mode.

In digital mode it displays the BER (bit error rate) and SNR (signal/noice ratio). Readout of UCB (uncorrected bits) and CB (corrected blocks) is also easy to do.
Furtermore DIGIAIR Pro present pitchtones (the higher tone the stronger signal) on a loudspeaker.

DIGIAIR Pro is very sensitive and can detect even the weakest signals.

DIGIAIR Pro can feed Voltage (5/12 Volt) to external active antennas this feature is short-circuit protected by an
automatic fuse.

DIGIAIR Pro is charged via an external DC power-source of13,5 -18 volt.

Even though the DIGIAIR Pro has a lot of functions it is still very easy to use and has a very compact design.

DIGIAIR Pro operates with 8xAA rechargeable batteries. The unit will work for at least 2 hours with fully charged batteries.

Technical Specifications:

• Input frequency: 45-860 MHz
• Input level: 30-80 dBuV
• Input impedance: 75 Ohm, F-connector
• Short circuit protection: Automatic fuse on antenna input
• Measuring method:
  • in digital: 
    Two bars showing BER (bit error rate) and SNR (signal/noice ratio)
  • in analog:
    One bar showing dBuV in high resolution or 6 bars showing strength of 6 channels
    Spectrum display
    Pitch tone indication from beeper
• Signal-level readout:
  • digital: BER and SNR values
  • analog: dBuV with maxhold-function
• Power out: 0V, 5V,12V and 24V on/off
• Power supply/charger: 10 -18V DC (Centerpin +)
• Display: Back-lighted 128x64 Pixels LCD
• Power consumption: 500mA
• Battery: 8x AA rechargeable batteries of 1200mA each
• Weight: 0.3 kg
• Dimensions: 185 x 115 x 50 mm
• Accessories: Powersupply 12V DC, 1A, Rubber-case, Power supply, Car charger